Printers
- PolyJet Legacy Printers
- Alaris30 V1
- Connex260
- Connex350/500
- Eden250
- Eden260
- Eden260V/VS
- Eden330
- Eden350
- Eden350V/500V
- J700 & J720 Dental
- J750/J735
- J750 Digital Anatomy
- Objet24/30 V2 Family
- Objet24/30 V3 Family
- Objet30 V5 Pro & Prime
- Objet260 Connex 1-2-3
- Objet260 Dental & Dental Selection
- Objet350/500 Connex 1-2-3
- Objet1000 Plus
Materials
- PolyJet Materials
- Agilus30 family
- Biocompatible
- Biocompatible Clear MED610
- Dental Materials
- Dental TrueDent Materials
- Dental TrueDent-D Materials
- Digital ABS Plus
- DraftGrey
- Elastico Clear/Black
- High Temperature
- MED610-DSG
- PolyJet Support
- Rigur & Durus
- Tango
- PolyJet ToughONE™
- Transparent
- Vero ContactClear
- Vero Family
- Veroflex
- VeroUltra Opaque
- Vivid Colors
- Stereolithography Materials
- Somos® 9120™
- Somos® BioClear™
- Somos® DMX SL™ 100
- Somos® Element™
- Somos® EvoLVe™ 128
- Somos® GP Plus™ 14122
- Somos® Momentum™
- Somos® NeXt™
- Somos® PerFORM™
- Somos® PerFORM Reflect™
- Somos® ProtoGen™ 18420
- Somos® ProtoTherm™ 12120
- Somos® Taurus™
- Somos® WaterClear® Ultra 10122
- Somos® WaterShed® AF
- Somos® WaterShed® Black
- Somos® WaterShed® XC 11122
- Somos® WaterShed® XC+
DraftGrey™ PolyJet Material
DraftGrey™ is a rigid PolyJet material designed for affordable, single-material concept models. It provides medium opacity and a smooth finish.
DraftGrey Printer Compatibility
DraftGrey compatibility and printing specifications vary by PolyJet printer. Use the table below to check minimum layer thickness and compatible support material.
| Printer | Minimum layer thickness | Compatible support material | Requirements |
|---|---|---|---|
| J850 Pro / J850 Prime / FABRIX | 14 µm (0.00055 in.) | SUP705™ water-jet removable; SUP706B™ soluble | |
| J850™ CORE | 14 µm (0.00055 in.) | SUP705™ water-jet removable | |
| J35™ Pro / J55 Prime / J55 Pro | 18 µm (0.0007 in.) | SUP710S™ water-jet removable; WSS150 water soluble | |
| Objet30™ Pro/Prime | 16 µm (0.0006 in.) | SUP705™ water-jet removable; SUP706B™ soluble | Objet30 V3 and above using GrabCAD Print |
DraftGrey Technical Properties
DraftGrey provides 50–65 MPa tensile strength, 75–110 MPa flexural strength, 45–50°C heat deflection temperature, 83–86 Shore D hardness, and a polymerized density of 1.17–1.18 g/cm³. Refer to the DraftGrey material Data sheet for complete test methods and specifications.
Frequently Asked Questions
- ⮞What is DraftGrey best suited for?
DraftGrey is designed for affordable, single-material concept models requiring rigidity, medium opacity, and a smooth finish. - ⮞Is DraftGrey suitable for functional parts?
DraftGrey is primarily intended for concept modeling. Check its mechanical and thermal properties to determine whether it meets your specific application requirements. - ⮞Where can I find the technical properties of DraftGrey?
Refer to the DraftGrey material data sheet for detailed mechanical, thermal, and physical properties and associated test methods. - ⮞What should I check before printing with DraftGrey?
Check printer compatibility, minimum layer thickness, compatible support material, and any printer-specific requirements before printing.
Buy Stratasys Materials and Service Consumables in Our Online Store