Printers
- PolyJet Legacy Printers
- Alaris30 V1
- Connex260
- Connex350/500
- Eden250
- Eden260
- Eden260V/VS
- Eden330
- Eden350
- Eden350V/500V
- J700 & J720 Dental
- J750/J735
- J750 Digital Anatomy
- Objet24/30 V2 Family
- Objet24/30 V3 Family
- Objet30 V5 Pro & Prime
- Objet260 Connex 1-2-3
- Objet260 Dental & Dental Selection
- Objet350/500 Connex 1-2-3
- Objet1000 Plus
Materials
- Stereolithography Materials
- Somos® 9120™
- Somos® BioClear™
- Somos® DMX SL™ 100
- Somos® Element™
- Somos® EvoLVe™ 128
- Somos® GP Plus™ 14122
- Somos® Momentum™
- Somos® NeXt™
- Somos® PerFORM™
- Somos® PerFORM Reflect™
- Somos® ProtoGen™ 18420
- Somos® ProtoTherm™ 12120
- Somos® Taurus™
- Somos® WaterClear® Ultra 10122
- Somos® WaterShed® AF
- Somos® WaterShed® Black
- Somos® WaterShed® XC 11122
uPrint SE/uPrint SE Plus
The Stratasys uPrint® SE and uPrint® SE Plus 3D printers are designed with ultimate simplicity in mind. The printer enables you to build parts quickly and easily, even if you’ve never used a 3D printer before. The uPrint SE/uPrint SE Plus printers incorporate the latest in innovative technologies to provide you with precise prototypes from a CAD design.
The Stratasys uPrint® SE 3D printer has a maximum build area of 8 x 6 x 6 inch (203 x 152 x 152 mm). The Stratasys uPrint® SE Plus 3D printer has a maximum build area of 8 x 8 x 6 inch (203 x 203 x 152 mm).
- 50/60Hz
- 100 - 240VAC
- 12 - 7A
- 1200W dedicated circuit
AC Power Requirements
- Required for communication and file transfer functions.
- 100 base T, Ethernet protocol, RJ45 connector
- Within 4 m (14 feet) of the printer.
- Either DHCP or Static IP configurations.
LAN Requirements
- Jigs and Fixtures
- Sand Casting
- Thermoforming
- Embedded Inserts
Applications
uPrint - Z EoT Sensor Replacement (End of Travel)
