The Stratasys J55 3D printer allows you to streamline and economize the process of producing models from different materials on the same build tray, in the same print job. With the J55 3D printer you can designate colors for parts of a model at the design stage (with CAD software) and save the model as a VRML file, and have the model print with the desired colors.
The J55 3D printer has a build size of 140 x 200 x190 mm (5.5 x 7.8 x 7.5 in).
- 50/60 Hz
- 100-240 VAC
AC Power Requirements
- Required prior to printer installation.
- Confirm at http://[printer IP address]:80.
- Static IP address.
Advanced Head Optimization - J55 Operation
Replacing Waste Container - J55 Operation
Featured Case Studies
Priority Designs - From KeyShot to 3D Print - EN PolyJet Case Study
This case study shows how Priority Designs simplified its workflow using Keyshots and GrabCAD.
Kinetic Vision AeroFlexx - EN PolyJet Case Study
How Kinetic Vision Uses the J55 to Improve Product Development
Kinetic Vision, a large product development consulting firm based in Cincinnati, Ohio, does a little bit of everything. The company works with a large range of clients, from small startups to Fortune 500 companies, to develop new products.
PolyJet support materials part 1
Read about the unique characteristics and support strength recommendations for PolyJet Support materials.
STLs and 3D Printing for PolyJet
Learn about the conversion process from a CAD file to an STL file and how to optimize it to achieve the best print results possible.