- PolyJet Part Quality Troubleshooting Guide
- Coarse and Faceted Surface
- Color Varies from Design Intent
- Curling
- Depressions
- Material Dripping onto the Tray
- Matte Appears as Glossy
- Matte Finish Around Holes
- Melted Look
- Rough Side Walls
- Shavings on Model or Tray
- Shifting
- Tackiness
- Yellowish Tint in Clear Parts
Dimension Family
The Stratasys Dimension 1200es and Dimension Elite 3D printers are designed with ultimate simplicity in mind. The systems enable you to build parts quickly, even if you have never used a 3D printer before.
The Stratasys Dimension 1200es’s build envelope measures 254 x 254 x 305 mm (10 x 10 x 12 in). Each material cartridge contains 922 cc (56.3 cu. in.) of usable material. The Dimension Elite’s build envelope measures 203 x 203 x 305 mm (8 x 8 x 12 in). Each material cartridge contains 922 cc (56.3 cu. in.) of usable material. This is enough to build continuously for about four days without reloading.
To view information about Stratasys FDM Legacy platforms (no longer manufactured), click here.
- 50/60 Hz
- 100-240 VAC
- 15-7A
- 1200W dedicated circuit
AC Power Requirements
- Required for communication and file transfer functions.
- 100 base T, Ethernet protocol, RJ45 connector.
- Either DHCP or Static IP configurations.
LAN Requirements
- Buy Stratasys Materials and Service Consumables in Our Online Store
- Jigs and Fixtures
- Sand Casting
- Thermoforming
- Embedded Inserts
Applications

FDM Printers - Painting
