PolyJet Part Quality Troubleshooting Guide

Coarse and Faceted Surfaces

Sometimes, the edges of a model appear triangulated and choppy. This can happen when the resolution of the original CAD model is not high enough, such as medical models sourced from ultrasounds and x-rays. Circular geometries and freeform curves are more susceptible to this issue, simple square and rectangular models less so. As a general rule, the printed model will never look better than its original file. If low resolution is affecting your model quality, here are some possible solutions.

 

 

Possible Solutions

Adjust Part Orientation

Try placing tessellated surfaces on the Z-axis and surfaces that don’t need to look perfect on the X and Y axes.

Preventive measures: The Z axis features the highest printing resolution, so generally try to align the finest features to this axis.

Also, use a high-resolution, high-quality CAD file whenever possible. Read our tutorial on the subject to help you determine a good resolution for your file: https://grabcad.com/tutorials/stls-and-3d-printing-for-polyjet.

 

Improve Native CAD File

Try smoothing the original CAD file in a CAD software. In Materialise® Magics®, for example, you can perform this using the Triangle Reduction and Smoothing tools. This method requires more time and expertise than the quick fix above. Also see our model accuracy document linked here.

Preventive measures: Same as above. 

  

Frequently Asked Questions

Learn what other users are asking about their printers.

Read now