Routine Maintenance Schedule

 

Frequency

Task

For More Information

Before printing

Clean the UV lamp lenses.

 

Before / after printing

Check the UV lamp overheating indicator.

See UV Lamp Check .

Before / after printing

Routine cleaning of:

•   print heads
•   roller surface
•   wiper
•   build tray and surrounding area

Cleaning the Print Heads, Roller and Wiper.

Weekly

Clean the purge unit waste collector.

See step 13 of Cleaning the Print Heads, Roller and Wiper.

Weekly

Perform the Pattern test.

See Pattern Test.

Weekly

Clean the roller waste collector.

See Cleaning the Roller Waste Collector and Inspecting the Roller Scraper.

Every 300 hours of printing (A reminder message appears.)

Calibrate the UV intensity.

See Testing and Calibrating the UV Lamps.

Every 300 hours of printing

Optimize the print heads.

See Optimizing (Calibrating) Print Heads.

Every 500 hours of printing

Replace the wiper.

See Cleaning the Print Heads, Roller and Wiper.

Every 700 hours of printing

Replace the roller pump tubes.

See Replacing the Roller Waste Tube.

Monthly, and after replacing print heads

Check the alignment of the print heads.

See Aligning the Print Heads.

Monthly

Clean debris from the Z‑axis shaft with a vacuum cleaner.

 

Monthly

Inspect the exhaust system (duct, fan, connections).

 

Monthly

Calibrate the load cells.

See Calibrating the Load Cells.

Monthly

Restart the printer computer and the server computer.

 

Every two years or every 2500 hours of printing

Preventive maintenance visit by service engineer.

Contact your Stratasys service provider.

Related TopicsRelated TopicsRelated TopicsRelated Topics

 

 

Questions, comments, suggestions? c-support@stratasys.com Legal © Stratasys