Offline Mode
You can use Objet Studio to prepare trays for printing in offline mode, on a remote computer or when the printer connection is not available. You also use offline mode to prepare trays for printing with other printers. In this case, if Objet Studio is currently connected to a printer, you must change to offline mode by removing this connection.
To disconnect Objet Studio from the printer:
| 1. | On the Job Manager ribbon, in the 3D Printer group, click  . |
| 2. | In the Set Printer Features dialog box, click . |
Disconnecting Objet Studio from a printer (A)
| 3. | In the Printer Connection dialog box, delete the computer name/IP address. |
Disconnecting Objet Studio from a printer (B)
| 4. | Click . |
“Unknown” appears in the printer-name field.
| 5. | Click . |
| 6. | In the pop-up message, confirm that you want to work in offline mode by clicking . |
offline message
When Objet Studio is in offline mode, you can configure it for preparing print jobs for different printers.
To change the Objet Studio offline configuration:
| 1. | In the Set Printer Features dialog box, select a printer type. |
| 2. | Click (not “Connect”). |
Related Topics