Setting the Printer Connection
When your printer is installed, the server computer is connected to that printer. Normally, there should be no reason to change this connection. Occasionally, however, you may need to reset the connection, to connect the server to another printer, or to use Objet Studio in off-line mode (without a printer connection).
To set (or change) the printer connection:
| 1. | On the Job Manager ribbon, in the 3D Printer group, click  . |
| 2. | In the Set Printer dialog box, click . |
| 3. | Enter the computer name or its IP address, or click to find and select it. |
| 4. | Click . |
When the connection is established, Objet Studio is configured to prepare print jobs for that printer.
If you can see the material levels in the Job Manager Screen, Objet Studio is connected to the printer.
Note: A printer can be listed by its name or by its computer's IP address.
Related Topics
| Questions, comments, suggestions? c-support@stratasys.com | Legal | © Stratasys |