Print Modes
Print modes in 3D printing are preset configurations that determine how an object is printed. They control various parameters such as layer height, print speed, and number of materials, allowing you to quickly select a balance between print quality and production time without adjusting individual settings for each print job.
For full printing and post-processing procedures required to achieve optimal results per supported application, refer to Stratasys Support Center resources, such as training and best practice guides per application.
Important:
For J5 DentaJet XL printers, changing the print mode requires running the Shutdown wizard with the More than 30 days option and then performing a system power-up by a service engineer.
To minimize downtime, contact your Stratasys service provider to schedule a service visit.
Do not try to load material without a service engineer as it might adversely affect printer operation.
Supported Print Modes
|
Print Mode |
J55 Pro/Prime |
J5 MediJet |
J5 Digital Anatomy |
J5 DentaJet | J5 DentaJet XL |
|---|---|---|---|---|---|
|
Super High Speed |
No |
No |
No |
No |
Yes 1 model 1 support |
|
High Quality High Speed |
No |
No |
No |
Yes 2 model 1 support |
Yes 2 model 1 support |
|
High Speed |
Yes 2 model materials 1 support material *Supported with GrabCAD Print Pro |
Yes 2 model materials 1 support material *Supported with GrabCAD Print Pro |
Yes 2 model 1 support |
No |
No |
|
Long Print |
Yes 1 (or 2) model materials 1 support material |
Yes 1 (or 2) model materials 1 support material |
No |
Yes 1 (or 2) model materials 1 support |
No |
|
High Quality Speed |
Yes 5 model materials 1 support material |
Yes 5 model materials 1 support material |
Yes 5 model 1 support |
Yes 5 model 1 support |
No |
Related Topics