Safety Features

Stratasys 3D printers are designed to comply with CE and FCC standards. They are equipped with the following safety features:

If the printer is not used as specified in this guide, these safety features may not provide adequate protection.

Interlock Switch

The power supplied to the UV light is turned off when the door is opened.

Warning
Do not defeat (override) the interlock switch. Doing so could result in serious personal injury. If the interlock switch does not function correctly, do not use the printer, and contact your service provider.

Safety Lock

The door is locked while the printer is working. If you do manage to open it, the UV light and the motors turn off.

Warning
Do not defeat (override) the safety lock. Doing so could result in serious personal injury. If the safety lock does not function correctly, do not use the printer, and contact your service provider.

UV Screening

The transparent sections of the door and sides block harmful UV radiation, allowing the operator to view the 3D prints during the printing process.

 

Grounded Chassis

The chassis of the printer is grounded, to prevent electrical shock.

Note: The power outlet must be grounded in accordance with the local electric code to provide this protection.