Positioning Objects on the Z‑Axis
When you use the automatic positioning option to arrange objects on the build tray, the objects are positioned directly on the tray. If you do not insert objects with automatic positioning, they often appear either above or below the tray.
In practice, the Eden260V system prints all models on the build tray on a one-millimeter bed of support material. The importance of positioning objects directly on the build tray with Objet Studio is to correctly display the objects on the screen.
To position objects directly on the tray:
|
2.
|
From the Object menu, select Lay On. |
To ensure that objects are always positioned directly on the tray:
|
1.
|
From the Tools menu, select Options, and display the Settings tab. |
|
2.
|
In the Automatic Lay On (Gravity) section, select Always. |
Other Z-axis options (in the Automatic Lay On section):
|
•
|
When under the tray—The display of objects that are below the build tray is automatically changed so that the object is at tray level. |
|
•
|
Never—The display of objects that are above or below the build tray is not changed. |